ZUIN ARREDAMENTI

Tel. +39 049 71 71 31

Skip to primary content

PRODOTTI > Pivot-sliding

NEW Pivot- sliding door

DOOR WITH ALUMINIUM CASING AND HOLLOW CORE PIVOT-SLIDING PANEL WITH ONE OR TWO LEAVES WITH PROVISION TO INSTALL A CONTINUOUS CEILING TRACK THROUGH THE PASSAGE.
(SYSTEM FOR ASSISTED MOBILITY WITH CEILING HOIST)

PIVOT-SLIDING DOOR FOR INSTALLATION IN SPACES EQUIPPED WITH A HOIST AND TRANSPORT SYSTEM FOR DISABLED OR IMPAIRED MOBILITY PERSONS.
PATENT PENDING

Supply of interior pivot-sliding door with leaf ope ning in both directions (and with one semi-fixed leaf in the case of a 2 le af pivot-sliding door) clad with completely flush plastic laminate or pain ted wood veneer.
Rounded jamb and frame profiles with 12/22 mm radiu s in EN AW 6060 T5 extruded aluminium alloy with general tolerances to EN 12020/2, in implementation of Italian legislative decree 81/200 8. Profiles with 13 UM natural silver anodized finish or RAL coating, cons tructed as follows

PANEL

Finished thickness of 46 mm, with core in extra-hard high-density rockwool, with perimeter surround in double 50×50 pine block board with 8+8 layers and core in fibreboard, with the entire assembly clad with another extra-hard 4.2 mm fibreboard on both sides. Finished with 9/10 gauge plastic laminate or veneered in painted wood, in choice of standard colours; non-standard colours available at a surcha rge. 46×20 mm aluminium jamb profile as above, with click-in fixi ng system and flush with laminate facing, rounded and shaped in such a way a s to achieve perfect opening from both directions (and with a semi-fixed leaf openable to 180° in the case of a pivot-sliding door with two leaves)

SELF-LOADING FRAME

Made of extruded aluminium profiles as above, rounded and without live edges, 15/10 gauge, preassembled with aligning squares and equipped with double brush seal on an aluminium support.
The frame is composed of two elements assembled telescopically: Profile functioning as internal casing and seat for insertion of profile B);
External casing serving to conceal the subframe (variable for wall thicknesses from 10 cm >).
The frame is of variable height as established by the Italian legislative decree from 2100 mm to 3000 mm and in variable widths from 700 mm to 2500 mm, and has a provision for installation of a ceiling track (in aluminium, linear or with variable curvature) for hoist system to assist the independence of reduced mobility users.
The dimensions will be from 50 mm to 100 mm in width and from 50 mm to 200 mm in height, with track load capacity for a minimum weight of 750 kg, with possible support for installation of suspended ceilings in mineral fibre and associated recessed ceiling lights.

HARDWARE

adjustment of +/-3 mm with the panel installed to distribute the gap between leaf and frame evenly and allow perfect pivoting and sliding movement, with approximately 5 mm height adjustment with the door installed in the frame track.
The top sliding track for the door panel is self-loading, made of heavy gauge extruded anodized aluminium with anodized silver finish or RAL coating and having a load capacity of up to 160 kg. The trolley is equipped with super-quiet bearings with 6 rollers of which 2 acting as thrust bearings and serving as a soft-stop mechanism; a magnetic self-closing lock that locks the door in a central position automatically in the closed position, causing it to be perfectly aligned at the rear of the frame; the door can also be used as an emergency exit.
Anti-snag lever handle in F1 silver aluminium complete with rose and escutcheon, thumb-turn with free/engaged indicator or cylinder lock installed at height of 90/100 cm from the floorinox.

Zuin Special Doors pivot-sliding mechanism tested on pivot-sliding door with finished 1246 mm leaf (up to clear passage width of 1200 mm) for 120,000 complete opening and closing cycles (60,000 opening and closing movements for each side).
The door is supplied preassembled in all parts.

Porta Rototraslante con guida binario 1 antaPorta Rototraslante con guida binario 1 antaPorta Rototraslante con guida binario 2 antePorta Rototraslante con guida binario 2 ante

All our doors are available in various sizes to meet your furnishing and functional preferences. The materials we use are carefully selected and the production process is based on craftsmanship skills.
We can also provide extremely reliable low noise automatic opening and closing as a testament to our attention to detail, to offer a guarantee of extremely safe and highly customized products

View data sheets >

registration required